 |
|
NYLENE 451 |
|
TECHNICAL DATA SHEET |
|
| General Description |
- Recommended for molding applications requiring both maximum durability and toughness
- Exceptional fatigue and wear resistance insure long product life to gears, bearings, cams, fasteners, and other load bearing parts
- Chemically resists oil and grease
- Optimum processing conditions should provide a melt temperature of 460°F-480°F at the nozzle
Properties
Physical Properties |
Test Method |
Units |
Dry as Molded |
|---|---|---|---|
| Mechanical Properties | Test Method |
Units |
Dry as Molded |
| Tensile Strength | D638 |
psi MPa |
12,000 (83) |
| Elongation at Break | D638 |
% |
70 |
| Flexural Modulus | D790 |
psi MPa |
390,000 (2,690) |
| Notched Izod @ 23 °C | D256 |
ft. lb./ in. J/m |
0.7 (37) |
| Notched Izod @ -40 °C | D256 |
ft. lb./ in. J/m |
0.4 @ -40 21 @ -40 |
| Thermal Properties | Test Method | Units | Dry as Molded |
| DTUL @ 1820 KPa | D648 |
°F °C |
167 (75) |
| DTUL @ 455 KPa | D648 |
°F °C |
347 (175) |
| Melt Point | D3418 |
°F °C |
420 (215) |
All values are for dry as molded specimens. The data set forth herein has been carefully compiled by Polymeric Resources Corporation. Values shown are typical properties and are not for specification. Since processing variables will affect properties, the reproducibility of our data in a customer's facility is not guaranteed. There is no warranty of any kind either expressed or implied, applicable to the use of this information, and the user assumes all risk and liability in connection therewith.
Issued: 2009/09/23