 |
|
NYLENE 9643 |
|
TECHNICAL DATA SHEET |
|
| General Description |
- 43% glass fiber reinforced PA 6,6/6 injection molding grade
- High strength and stiffness of reinforced nylon,lower crystallinity associated with nylon 6,6/6.
- Suitable for handles and levers, housings, brackets, and other similar uses. NC-101 would indicate Natural color
- UV for UV protection and UW for Weatherability.
Properties
Physical Properties |
Test Method |
Units |
Dry as Molded |
|---|---|---|---|
| Mechanical Properties | Test Method |
Units |
Dry as Molded |
| Tensile Strength | D638 |
psi MPa |
26,000 179 |
| Elongation | D638 |
% |
3 |
| Flexural Modulus | D790 |
psi MPa |
1,379,000 9495 |
| Notched Izod @ 23 °C | D256 |
ft. lb./ in. J/m |
1.9 102 |
| Thermal Properties | Test Method | Units | Dry as Molded |
| DTUL @ 264 psi/1.82 MPa | D648 |
°F °C |
428 220 |
| DTUL @ 66 psi/0.45 MPa | D648 |
°F °C |
446 230 |
| Melt Point | D3418 |
°F °C |
455 235 |
All values are for dry as molded specimens. The data set forth herein has been carefully compiled by Polymeric Resources Corporation. Values shown are typical properties and are not for specification. Since processing variables will affect properties, the reproducibility of our data in a customer's facility is not guaranteed. There is no warranty of any kind either expressed or implied, applicable to the use of this information, and the user assumes all risk and liability in connection therewith.
Issued: 2009/09/23